EMDEK TURBO-SPIN SERIES AIR-ASSISTED
SPINNER FERTILIZER SPREADERS
OPERATORS MANUAL AND PARTS LIST
ACKNOWLEDGEMENT


Thank you for having purchased our Emdek TURBO-SPIN Fertilizer Spreader, we are sure
that with proper maintenance and care, this unit will continue to give you many years of
satisfactory and reliable service. Should you require more information or back up service,
please do not hesitate to contact our authorised dealers from whom you have purchased
this unit.
Should you require spare parts or detailed information on our products, please contact the
dealer from whom you have purchased this machine or you may also contact us direct in
the event of unavailability of dealers in your area at the address shown below :


EMDEK SENDIRIAN BERHAD
6 Jalan Lombong Emas 6
Seremban Light Industrial Park
Off Jalan Tun Dr. Ismail
70200 Seremban, Negri Sembilan, Malaysia



SAFETY PRECAUTIONS:

The following safety precautions must be observed to help
prevent accidents to all personnel and must be strictly
adhered to :
1. Do not permit anyone other than the operator to ride on the
    tractor when in transport or during operation.
2. Do not permit anyone to sit or ride on the implement when in
    transport or during operation.
3. Never leave the tractor unattended when the engine is still
    running, switch off the engine and remove the key.
4. Always switch off the tractor engine and disengage the
    tractor power take off before attempting to clean, adjust or
    lubricate the tractor or implement when mounted.
5. Before operations, always check that all nuts and bolts are
    properly tightened. When a new machine is delivered, new
    paint on working parts are either removed or compressed
   during work, thus bolts and nuts will tend to work loose. It is
    important that all nuts and bolts are re-tightened after about
4 - 5 hours of work from new.
6. On no account must hands be inserted into the TURBOSPIN
    spreading mechanism when the implement is still
    attached to the tractor especially when the engine is still
    running !!
7. Do not stand on the TURBO-SPIN spreading mechanism or
    it risk the likelihood of being damaged.


GENERAL SPECIFICATIONS


The EMDEK TURBO-SPIN fertilizer spreader is suitable for spreading granular, crystalline
or powdered fertilizers. Different models are available to give various hopper capacities as
shown below: